Agilent-technologies J3972A Manuel d'utilisateur télécharger pdf (Page 81)

Installation

Connecting the Probe

The following methods are available for Out-of-Band connections:

“Direct Connection” below

“Modem Connection” on page 61

“Data Switch Connection” on page 66

Direct Connection

To make a direct connection to the probe, connect the NetMetrix management

station’s serial port to the probe’s RS-232C port using a null modem cable

(Agilent part number 24542G—9-to-25 pin, or equivalent). Figure 3-12 shows the

direct connection to the probe.

Figure 3-12: The Probe’s Direct Connection

Modem Connection

You can use a modem connection to increase the distance between the probe and

the NetMetrix management station. Perform the following tasks to make a modem

connection between a NetMetrix management station and the probe. Figure 3-13

shows the modem connection to the probe.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 188 189

Pas de commentaire

Agilent-technologies J3972A Manuel d'utilisateur Page 81