Agilent-technologies Agilent E6474A Manuel d'utilisateur télécharger pdf (Page 157)

System Information C

Agilent E6474A User’s Guide 157

Power

Power (internal GPS, Option 200)

9 to 34 V DC, 9W

9 to 34 V DC, 10W

Transformer AC Power (supplied with

receiver)

100 - 240 Volts AC 50 - 60 Hz

Internal GPS

‡

(Option 200)

GPS Receiver 8 Channel internal GPS receiver

Connector type SMA

Differential compatible without dead reckoning

Note: Internal GPS is standard on all “C” receivers. It can be disabled if you wish to use an external

GPS system.

* It is recommended the input signal level not exceed – 25 dBm.

† Adjacent channel desensitization applies to the wideband mode (1.25 MHz IF Filter) and is defined as: 1 dB compression of

tuned signal with interfering signal ±1.25 MHz from tuned signal.

‡ Receivers (with the exception of “C” receivers) fitted with an internal GPS do not support connection to external GPS receiv-

ers.

Item Description Specification

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 183 184

Pas de commentaire

Agilent-technologies Agilent E6474A Manuel d'utilisateur Page 157