Agilent-technologies N2610A Manuel d'utilisateur Page 177
- Page / 248
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
System Operations 7
Printer Setup
Agilent FrameScope 350 User’s Manual 169
Printer Setup
The FrameScope 350 can print labels directly to a Brady TLS2200 label
printer. The labeling parameters are set using the procedure “Choosing
the Labeling Format” on page 64. When the FrameScope is configured as
described in the following procedure, a label for the tested cable will be
printed after saving a test result.
To configure the FrameScope 350 to print to the Brady label printer:
1 On the Main Menu, press System. The System Settings screen
displays.
2 On the System Settings screen, press Autoprint, then Edit. The
Printer Setup screen displays.
3 Press Autoprint to enable the Autoprint function. A checkmark
shows that the function is enabled.
4 Connect the N2605A-050 interface cable to the serial ports of the
FrameScope 350 and Brady TLS2200.
5 Turn the Brady printer on.
6 Press the Func and Exit keys on the printer simultaneously. This
sets the printer to Peripheral mode.
- Agilent N2610A 1
- FrameScope 350 1
- Network Performance 1
- Analyzer 1
- In This Guide… 3
- Contents 5
- 4Fiber Testing 6
- 9 Cable Tester Reference 7
- 11 Specifications 7
- 12 Glossary 7
- Front View 10
- Side Views 11
- Controls 12
- The Main Menu at a Glance 15
- The Network Tab 16
- The Cable Tab 17
- Getting Started 18
- Connecting to the Network 20
- Using the FrameScope 350 21
- Running a Test 21
- Network Testing with the 23
- Network Testing Overview 24
- Examining the Network 25
- Detailed List 26
- Changing the Autotest Metrics 31
- Using the Stations List 32
- Stations List 33
- Performing a Ping Test 36
- Performing a Trace Route 39
- Performing SNMP Queries 42
- Viewing Statistics 45
- Generating Network Traffic 48
- Performing a MAC Loopback 51
- Viewing the Error Log 55
- Using the Test Database 57
- Using the Network Database 58
- Locating Switch Ports 60
- Agilent Technologies 63
- Cable Testing Overview 65
- Cable Testing Procedure 67
- Simple Label Format 73
- TIA-606-A Label Format 75
- Hierarchical Label Format 77
- Adding a new cable type 80
- Saving Test Results 87
- Saving the Results 89
- Viewing Result Details 90
- Data Screens 92
- Plots Screens 92
- Locator Screens 93
- Using Talksets 95
- Using CompactFlash™ Cards 96
- Printing Labels from a PC 99
- Printing Labels 100
- Fiber Testing 101
- Fiber Testing Overview 102
- Double-Ended, Fiber Pair 103
- Calibrating the Tester 104
- Method B 105
- 4 Fiber Testing 106
- Method C 106
- Setting Up an Autotest 109
- Setting the Loss Limit 110
- Overall Budget Method 111
- Loss/Length Method 112
- Setting the Length Limit 113
- Choosing the Network Limit 114
- Entering the Site Name 114
- Choosing the Labeling Format 115
- Choosing the Cable Type 116
- Fiber Testing 4 117
- Setting the Modal Bandwidth 118
- Choosing the Connector Type 118
- Adding a new connector type 119
- Entering the Operator Names 121
- Running an Autotest 122
- Cable Testing in Expert Mode 123
- Testing Overview 125
- Changing to Expert Mode 126
- The Expert Autotest Setup 127
- Setting the Test Limit 131
- Viewing Probe Information 132
- Setting Network Limits 133
- Setting the Measurements 137
- Setting the Maximum Frequency 140
- Setting the Storage Location 141
- Setting the Operator Names 141
- The Expert Tools Menu 142
- To view results details: 143
- Certifying a Network 144
- Blinking the Port 145
- Learning the NVP of a Cable 146
- Measuring the Cable Length 147
- COAX Testing 150
- Twinax Testing 151
- Expert Fiber Testing 153
- About Fiber Expert Mode 154
- The Fiber Tools Menu 158
- Measuring Length and Delay 159
- Using the Power Meter 159
- Using Trace Mode 160
- Learning the NVP of a Fiber 161
- 6 Expert Fiber Testing 162
- System Operations 163
- The Status Display Area 164
- The System Menu 165
- System Information 166
- Storage Setup 167
- Battery Status 168
- Time and Date Setup 169
- User Interface Setup 170
- Operator Setup 171
- Touchscreen Calibration 172
- Serial Baud Rate Setup 173
- Restore Default Settings 174
- Calibration Information 176
- Printer Setup 177
- Network Settings 178
- System Operations 7 179
- 7 System Operations 180
- Remote Control 181
- SNMP Settings 182
- Demo Mode 183
- Network Performance Analyzer 185
- Reference 185
- Network Connection 187
- Network Database 189
- Active Discovery Process 190
- Network Performance Autotest 192
- The Default Autotest Suite 193
- Editing Tests 193
- Deleting Tests 193
- Adding Tests 194
- DHCP Server 195
- DNS Server 197
- Test Setup 199
- NT File Server 200
- NFS File Server 200
- Web Server 203
- E-mail Server 205
- Autotest Results 208
- Statistics 210
- Top Transmitters 211
- Error Mix 211
- Protocol Mix 212
- Network Tools 213
- SNMP Query 214
- Locate Switch Port 214
- MAC Loop-back 214
- Traffic Generation 214
- Memory Requirements 218
- Cable Tester Reference 219
- Measurements 220
- Near End Crosstalk (NEXT) 221
- Attenuation 221
- Return Loss 222
- Power Sum NEXT (PSNEXT) 222
- Power Sum ELFEXT (PSELEXT) 223
- Power Sum ACR (PSACR) 223
- Resistance 223
- Ambient Noise 223
- Calibration 224
- DualRemote 350 Reference 227
- The DualRemote 350 228
- Indicators 229
- 10 DualRemote 350 Reference 230
- Diagnostics 230
- Specifications 231
- Physical 232
- Environmental 233
- Electrical 234
- SmartProbe test port 235
- Serial port 235
- USB-A port 235
- USB-B port 235
- CompactFlash™ card slot 236
- Specifications 9 237
- Fiber SmartProbe 238
- Glossary 239
- Glossary 9 241
- 9 Glossary 242
Produits connexes et manuels pour Matériel Agilent-technologies N2610A
(194 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.175 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels