Agilent Technologies Router E6385A Manuel d'utilisateur télécharger pdf (Page 62)

Performing Tests

Pilot Only Test

Chapter 4

Performing Tests

Review the Results

The Test Software will begin running pilot channel tests on the selected BBA. During the

test, results will be displayed with a failure indication if a measurement falls outside the

specified limits (see Figure 4-4).

To see the pass/fail limits for each data point as it is measured, use the BTS Laptop

Utility program Test Results window.

When the testing is complete, the Test Software will pause to allow you to review the

on-screen test results. Press the

k1 (Proceed) key to return to the Test Selections Menu

screen.

Figure 4-4 Results from the Pilot Only Test Sequence

The “F” (Fail) indicates that the

measured value is outside of the

specified limits. To change limits,

see “Changing Pass/Fail Limits”

on page 98.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 128 129

Pas de commentaire

Agilent Technologies Router E6385A Manuel d'utilisateur Page 62