Agilent Technologies 22D Manuel d'utilisateur télécharger pdf (Page 5)

Installation Note 08720-90318 5

Installation Procedure for the Upgrade Kit

Remove the Bumpers and Covers

1. Disconnect the power cord.

2. Remove the top cover (refer to Figure 1):

a. Remove the upper bumpers on the rear of the analyzer (item 1), by loosening the

attaching screws (item 2).

b. Loosen the top cover screw (item 3).

c. Slide the cover off towards the rear of the analyzer.

3. Remove the bottom cover:

a. Turn the analyzer upside-down.

b. Remove the remaining two bumpers on the rear of the analyzer (item 4) by loosening

the attaching screws (item 5).

c. Loosen the bottom cover screw (item 6).

d. Slide the cover off towards the rear of the analyzer.

Figure 1 Removing the Top and Bottom Covers

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

Agilent Technologies 22D Manuel d'utilisateur Page 5