Agilent Technologies 6002A Guide de l'utilisateur télécharger pdf (Page 298)

E Cleaning Information Additional Cleaning Information

298 E6000C Mini-OTDR User’s Guide, E0302

2 Put a little liquid soap on the surface and gently spread

the liquid over the whole area.

3 Wash off the emulsion with water, being careful to

remove it all, as any remaining streaks can impair

measurement accuracy.

4 Take a new, dry soft-tissue and remove the water, by

rubbing gently over the surface using a small circular

movement.

5 Blow away remaining lint with compressed air.

Alternative Procedure A

To clean lenses that are extremely sensitive to mechanical

stress or pressure you can also use an optical clean

polymer film. This procedure is time-consuming, but you

avoid scratching or destroying the surface.

1 Put the film on the surface and wait at least 30 minutes

to make sure that the film has had enough time to dry.

2 Remove the film and any dirt with special adhesive

tapes.

Alternative Procedure B

If your lens is sensitive to water then:

1 Moisten the lens or the mirror with isopropyl alcohol.

2 Take a new, dry soft-tissue and remove the alcohol,

dissolved sediment and dust, by rubbing gently over the

surface using a small circular movement.

3 Blow away remaining lint with compressed air.

1 2 ... 293 294 295 296 297 298 299 300 301 302 303 ... 319 320

Pas de commentaire

Agilent Technologies 6002A Guide de l'utilisateur Page 298