Agilent Technologies U1731C Guide de l'utilisateur télécharger pdf (Page 22)

1 Introduction

Preparing Your LCR Meter

4 U1731C/U1732C/U1733C User’s Guide

1 Open the battery cover. Lift the tilt stand. Loosen the

screw with a suitable Phillips screwdriver and remove the

battery cover as shown in Figure 1- 1.

2 Insert the battery. Observe the proper battery polarity.

The terminal ends of the battery are indicated inside the

battery compartment.

3 Close the battery cover. Place the battery cover back in

its original position and tighten the screw.

Figure 1-1 Installing the batteries

The battery level indicator in the lower right- hand corner of

the display indicates the relative condition of the battery.

Table 1- 1 describes the various battery levels the indicator

represents.

WARNING

To avoid false readings, which could lead to possible electric shock

or personal injury, replace the battery as soon as the low battery

indicator appears. Do not discharge the battery by shorting the

battery or reverse the battery polarity.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 106 107

Pas de commentaire

Agilent Technologies U1731C Guide de l'utilisateur Page 22