Agilent Technologies 81640A Guide de l'utilisateur télécharger pdf (Page 100)

Cleaning Information How to clean connector interfaces

100 Agilent 81689A, 81689B and 81649A Tunable Laser Modules User’s Guide, Third Edition

Preferred Procedure Use the following procedure on most occasions.

1 Clean the adapter by rubbing a new, dry cotton swab over the

surface using a small circular movement.

2 Blow away any remaining lint with compressed air.

Procedure for Stubborn Dirt Use this procedure when there is greasy dirt on the adapter:

1 Moisten a new cotton swab with isopropyl alcohol.

2 Clean the adapter by rubbing the cotton swab over the surface using

a small circular movement.

3 Take a new, dry soft tissue and remove the alcohol, dissolved

sediment and dust, by rubbing gently over the surface using a small

circular movement.

4 Blow away any remaining lint with compressed air.

How to clean connector

interfaces

CAUTION Be careful when using pipe cleaners, as the core and the bristles of the

pipe cleaner are hard and can damage the interface.

Do not use pipe cleaners on optical head adapters, as the hard core of

normal pipe cleaners can damage the bottom of an adapter.

Preferred Procedure Use the following procedure on most occasions.

1 Clean the interface by pushing and pulling a new, dry pipe cleaner

into the opening. Rotate the pipe cleaner slowly as you do this.

2 Then clean the interface by rubbing a new, dry cotton swab over the

surface using a small circular movement.

3 Blow away any remaining lint with compressed air.

Procedure for Stubborn Dirt Use this procedure when there is greasy dirt on the interface:

1 Moisten a new pipe cleaner with isopropyl alcohol.

2 Clean the interface by pushing and pulling the pipe cleaner into the

opening. Rotate the pipe cleaner slowly as you do this.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 113 114

Pas de commentaire

Agilent Technologies 81640A Guide de l'utilisateur Page 100