Agilent Technologies PN 8510-16 Guide de l'utilisateur télécharger pdf (Page 3)

System Configuration

The basic 8510C measurement system configura-

tion needed for test port flatness correction is

shown in Figure 1. A single channel power meter

such as the Agilent 437B, E4418A, or E4418B is

required, along with a compatible sensor, for per-

forming the power flatness calibration. Power

meters with the 437B command set must be used

for the power level flatness correction.

Figure 1. Basic Agilent 85107B measurement system con-

figuration for test port flatness correction

The Agilent 8511B frequency converter test

set may be used with the test port power flatness-

correction feature. The range of the test port

power is determined by the available power of

the 8360 source and the insertion loss of the com-

ponents added to the measurement system.

8517B test set

8485A

power sensor

E4418B

power meter

83651B

synthesized sweeper

8510 system bus

85107B Measurement System

8510C network analyzer

1 2 3 4 5 6 7 8 ... 11 12

Pas de commentaire

Agilent Technologies PN 8510-16 Guide de l'utilisateur Page 3