Agilent Technologies EXG Manuel d'utilisateur télécharger pdf (Page 39)

Recording a Rhythm ECG

2-17

Chapter 2

Recording an ECG

2Recording a Rhythm ECG

To record a Rhythm ECG, perform the following steps:

1. If the cardiograph is not On, press .

2. Prepare the patient and apply the electrodes.

3. Press F1 to select and check the signal quality.

4. Select the lead, chart speed, and sensitivity by pressing , , or

keys as necessary.

5. Press on the front panel. Enter or edit patient information as prompted on

the screen.

6. The cardiograph continuously acquires the ECG for 60 seconds.

7. If you have connected the cardiograph to a printer, the ECG will be transferred

to the printer and printed out.

8. A message Store ECG? will display. Press Yes to store the ECG, or press No

to discard the ECG.

9. You can connect the cardiograph to a printer and print the stored rhythm ECG.

Refer to Appendix A for instructions on connecting the cardiograph to a printer.

Rhythm

Lead

Speed

Size

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 97 98

Pas de commentaire

Agilent Technologies EXG Manuel d'utilisateur Page 39