Agilent Technologies 35670A Spécifications télécharger pdf (Page 66)

AGILENT 35670A

Supplemental Operator’s Guide

Measuring Time Averaged Spectrums with External Triggering

Now that the external trigger has been set up, the analyzer is ready to measure a

signal with time averaging as follows:

• Connect the external trigger signal to the EXT TRIG port on the back of

the AGILENT 35670A.

• Turn on the AGILENT 35670A, or

• Press the green [Preset] hardkey

• Press the yellow [Pause/Cont] hardkey if desired.

Set up measurement parameters

• Press the [Freq] hardkey

• Enter 800 and then press the [Hz] softkey (F2)

• Press the [Avg] hardkey.

• Press the [AVERAGE TYPE] softkey (F3).

• Press the [TIME] softkey (F3).

• Turn on averaging by pressing the [AVERAGE ON OFF] softkey (F1)

until ON is highlighted.

• Press the yellow [Start] hardkey.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 81 82

Pas de commentaire

Agilent Technologies 35670A Spécifications Page 66