Agilent Technologies N4010A Spécifications télécharger pdf (Page 24)

Making Your First Measurements

Running a Confidence Check on the Front Panel (Bluetooth)

Chapter 216

Figure 2-2 Test Set RFIO Connections

3. Press the

Config key.

Figure 2-3 Typical Configure Link Screen when ACL is Selected

4. Use the

Arrow and Select keys to highlight and select an ACL Link as shown in

Figure 2-3.

5. Press the softkey.

6. Press the softkey.

7. In a few seconds the Inquiry Results are displayed. An example is shown in

Figure 2-4. If no device is detected, check the EUT connection, and press the

softkey.

NOTE To apply Loss Compensation, for example for cable loss:

Press

Mode, . Use the Select key to check the Apply Loss

Compensation box. Use the arrow keys and numeric pad to enter values in the

Fixed Loss field. Press the softkey.

EUT

Inquiry Procedure

Restart Inquiry

Loss Comp

N4010-90086.book Page 16 Friday, April 4, 2014 3:12 PM

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

Pas de commentaire

Agilent Technologies N4010A Spécifications Page 24