Agilent-technologies InfiniiVision 6000 Series Manuel d'utilisateur télécharger pdf (Page 21)

Performance characteristics (continued)

Measurement features

Automatic measurements Measurements are continuously updated. Cursors track last selected measurement.

Up to four measurements can be displayed on screen at any one time.

Voltage (scope channels only) Peak-to-peak, maximum, minimum, average, amplitude, top, base, overshoot, preshoot, RMS,

standard deviation (AC RMS)

Time Frequency, period, + width, – width and duty cycle on any channel

Rise time, fall time, X at max Y (time at max volts), X at min Y (time at min volts), delay, and

phase on scope channels only

Counter Built-in 5-digit frequency counter on any channel. Counts up to the scope’s bandwidth (1 GHz

max). The counter resolution can be increased to 8 digits with an external 10 MHz reference.

Threshold definition Variable by percent and absolute value; 10%, 50%, 90% default for time measurements

Cursors Manually or automatically placed readout of Horizontal (X, ∆X, 1/∆X) and Vertical (Y, ∆Y).

Additionally logic or scope channels can be displayed as binary or hex values.

Waveform math One function of 1-2, 1x2, FFT, differentiate, integrate.

Source of FFT, differentiate, integrate: scope channels 1 or 2, 1-2, 1+2, 1x2.

FFT

Points Fixed at 1000 points

Source of FFT Scope channels 1 or 2 (or 3 or 4 on MSO/DSO6xx4A only), 1+2, 1-2, 1*2

Window Rectangular, flattop, hanning

Noise floor –50 to –90 dB depending on averaging

Amplitude Display in dBV, dBm at 50 Ω

Frequency resolution 0.05/time per div

Maximum frequency 50/time per div

Storage

Save/recall (non-volatile) 10 setups and traces can be saved and recalled internally.

Storage type and format USB 1.1 host ports on front and rear panels

Image formats: BMP (8-bit), BMP (24-bit), PNG (24-bit)

Data formats: X and Y (time/voltage) values in CSV format, ASCII XY and binary format

Trace/setup formats: Recalled

I/O

Standard ports USB 2.0 high speed device, two USB 1.1 host ports, 10/100-BaseT LAN, IEEE488.2 GPIB,

XGA video output

Max transfer rate IEEE488.2 GPIB: 500 kbytes/sec

USB (USBTMC-USB488): 3.5 Mbytes/sec

100 Mbps LAN (TCP/IP): 1 Mbytes/sec

Printer compatibility Selected HP Deskjet, Officejet and HP PCL 3.0 compatible printers

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Agilent-technologies InfiniiVision 6000 Series Manuel d'utilisateur Page 21