Agilent Technologies 6023A, 6028A Spécifications télécharger pdf (Page 24)

These dual range DC power supplies

provide the stable, accurate, and

reliable DC power that the R&D

engineer needs. These models are

CV/CC, so they can serve as either

voltage or current sources. They

can be used either for manual or

automated testing where moderate

speed and accuracy are required.

VXIPlug&Play drivers further

simplify computer control.

These DC power supplies have many

features to help the R&D engineer to

quickly and easily bias and monitor

prototype circuitry. Remote sensing

eliminates the errors in voltage

regulation due to voltage drops in

the load leads. Delicate prototypes

are protected by overvoltage and

overcurrent protection features.

Up to 3 frequently used operating

states may be stored for later recall.

The output is isolated from chassis

ground.

For applications where even higher

accuracy is needed, or speed must

be optimized, see the Agilent 6600

series of performance DC power

supplies.

Basic DC Power Supplies essential features for a tight budget

Sp ecifica ti on s

(at 0° to 55°C unless

otherwise specified)

E3632A E3633A E3634A

More detailed specifications at

www.agilent.com/find/E3600

Dual range outputs

Small, compact size for bench use

Low output ripple and noise

Built-in measurements and basic programmable features

Protection features to ensure DUT safety

E3632A-E3634A

Single-Output

120 W to 200 W GPIB

Number of outputs 1 1 1

GPIB Yes Yes Yes

Output ratings

Range 1 0 to 15 V, 7 A 0 to 8 V, 20 A 0 to 25 V, 7 A

Range 2 0 to 30 V, 4 A 0 to 20 V, 10 A 0 to 50 V, 4 A

Load regulation

Voltage <0.01% + 2 mV <0.01% + 2 mV <0.01% + 2 mV

Current <0.01% + 250 µA <0.01% + 250 µA <0.01% + 250 µA

Line regulation

Voltage <0.01% + 2 mV <0.01% + 2 mV <0.01% + 2 mV

Current <0.01% + 250 µA <0.01% + 250 µA <0.01% + 250 µA

Ripple and noise

from 20 Hz to 20 MHz

Normal-mode voltage <350 µVrms/2 mVp-p <350 µVrms/3 mVp-p <500 µVrms/3 mVp-p

Normal-mode current <2 mArms <2 mArms <2 mArms

Common-mode current <1.5 µArms <1.5 µArms <1.5 µArms

Programming accuracy

at 25°C ±5°C

Voltage 0.05% + 10 mV 0.05% + 10 mV 0.05% + 10 mV

Current 0.2% +10 mA 0.2% +10 mA 0.2% +10 mA

Readback accuracy at 25°C ±5°C

Voltage 0.05% + 5 mV 0.05% + 5 mV 0.05% + 5 mV

Current 0.15% + 5 mA 0.15% + 5 mA 0.15% + 5 mA

Resolution

Program 1 mV, 0.5 mA 1 mV, 1 mA 3 mV, 0.5 mA

Readback 0.5 mV, 0.1 mA 0.5 mV, 1 mA 1.5 mV, 0.5 mA

Meter 1 mV, 1 mA 1 mV, 1 mA 1 mV, 1 mA

(<10 A/10 mA (≥10 A)) (<10 A/10 mA (≥10 A))

Transient response 50 µs for output to recover to within 15 mV following a change in output

current from full load to half load or vice versa

*Maximum current is derated 1% per °C from 40°C to 55°C %

For off-the-shelf shipment

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 148 149

Commentaires sur ces manuels

Pas de commentaire

Agilent Technologies 6023A, 6028A Spécifications Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Unités d'alimentation électrique Agilent Technologies 6023A, 6028A