Agilent Technologies E5810B Guide de l'utilisateur télécharger pdf (Page 13)

E5810B LAN/GPIB/USB Gateway

Configuring the E5810B

E5810B Quick Start Guide 11

1 Select View & Modify Configuration from the E5810B

Welcome page to display the E5810B current configuration.

2 Select Modify Configuration and enter the password to

configure the E5810B. The default password is E5810.

3 Set the DHCP setting to OFF, and update the IP Address,

Subnet Mask, and Default Gateway with the parameters

provided by your system administrator in “Network

information" on page 6.

4 If you are using Domain Name Server (DNS), enter the DNS

IP address and hostname provided by your system

administrator.

5 Select Save and then select Reboot E5810B to save

the configuration.

6 Disconnect the E5810B from the local network and connect

the E5810B to the Enterprise network.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Pas de commentaire

Agilent Technologies E5810B Guide de l'utilisateur Page 13