Agilent Technologies 81134A Guide de l'utilisateur télécharger pdf (Page 46)

Setting Up Generic and Advanced Signals Setting Up a Burst Signal

46 Agilent 81133A/81134A Pulse Generator User’s Guide, September 2008

Setting Up a Burst Signal

Task Set up a burst signal consisting of a 32- bit data pattern repeated

twice at a period of 500 ps with 50 ps delay and 100 ps pulse

width.

The data pattern is: 10100000000000000000000000000000

The amplitude is 2.0 V and the offset is 0 V.

Start the output at the rising edge of an external signal with 1 V

threshold applied at the start input.

Using the Graphical User Interface

Instrument Settings To set the instrument parameters:

1 Disable the outputs.

2 In the instrument panel, choose the Burst mode.

3 Set the burst repetition to 2.

4 Set the Period to 500 ps.

Arming Source

Triggered by:

External Signal

-1 V

Generated

Signal

1 V

Delay = 50 ps

Width = 100 ps

Period = 500 ps

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 91 92

Pas de commentaire

Agilent Technologies 81134A Guide de l'utilisateur Page 46