Agilent Technologies E8364C Guide de l'utilisateur télécharger pdf (Page 17)

User’s Guide 11

E8362/3/4C Option H85

Operation

The Agilent Option H85 can be configured differently for many applications. Included in

this manual are three typical configurations:

• Figure 3, “2-Port Two Way High Power Configuration.”

• Figure 4, “2-Port One Way High Power Configuration.”

• Figure 5, “2-Port Forward DUT Configuration.”

Refer to the configuration diagrams for external component connections and/or operating

constraints when utilizing the high power capability of the Agilent E8362/3/4C Option

H85.

When using the Agilent E8362/3/4C Option H85 in the high power configuration the

analyzers R1 Input path must be set to External (flow through R1 front panel jumper

loop).

NOTE The internal firmware of the PNA has not been modified for this option. The

PRESET (default) condition for the power levels indicated on the Agilent

E8362/3/4C Option H85 may differ depending on the USER PRESET

condition that is configured.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Pas de commentaire

Agilent Technologies E8364C Guide de l'utilisateur Page 17