Agilent Technologies InfiniiVision 7000 Series Manuel d'utilisateur télécharger pdf (Page 17)

Performance characteristics (continued)

Vertical system: scope channels

Scope channels MSO/DSO7xx2A: Ch 1 and 2 simultaneous acquisition

MSO/DSO7xx4A: Ch 1, 2, 3 and 4 simultaneous acquisition

Bandwidth (–3 dB)* MSO/DSO701xA: DC to 100 MHz

MSO/DSO703xA: DC to 350 MHz

MSO/DSO705xA: DC to 500 MHz

MSO/DSO710xA: DC to 1 GHz

AC coupled MSO/DSO701xA: 3.5 Hz to 100 MHz

MSO/DSO703xA: 3.5 Hz to 350 MHz

MSO/DSO705xA: 3.5 Hz to 500 MHz

MSO/DSO710xA: 3.5 Hz to 1 GHz

Calculated rise time (=0.35/bandwidth) MSO/DSO701xA: 3.5 nsec

MSO/DSO703xA: 1 nsec

MSO/DSO705xA: 700 psec

MSO/DSO710xA: 350 psec

Single-shot bandwidth MSO/DSO701xA: 100 MHz

MSO/DSO703xA: 350 MHz

MSO/DSO705xA: 500 MHz

MSO/DSO710xA: 1 GHz (in half-channel mode)

Range

MSO/DSO701xA, MSO/DSO703xA and MSO/DSO705xA: 2 mV/div to 5 V/div (1 MΩ or 50 Ω)

MSO/DSO710xA: 2 mV/div to 5 V/div (1 MΩ), 2 mV/div to 1 V/div (50 Ω)

Maximum input CAT I 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpk

CAT II 100 Vrms, 400 Vpk

With 10073C 10:1 probe: CAT I 500 Vpk, CAT II 400 Vpk

Offset range ±5 V on ranges <10 mV/div; ±20 V on ranges 10 mV/div to 200 mV/div;

±75 V on ranges >200 mV/div

Dynamic range ±8 div

Input impedance 1 MΩ ± 1% || 14 pF or 50 Ω ± 1.5%, selectable

Coupling AC, DC

BW limit 25 MHz selectable

Channel-to-channel isolation DC to max bandwidth >40 dB

Standard probes 10073C shipped standard for each scope channel (1165A probes optional)

Probe ID Auto probe sense and AutoProbe interface

Agilent- and Tektronix-compatible passive probe sense

* Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature.

1 2 mV/div is a magnification of 4 mV/div setting for 350 MHz to 1 GHz models. For vertical accuracy calculations, use full scale of 16 mV for 1 mV/div sensitivity setting

and 32 mV for 2 mV/div sensitivity setting.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Agilent Technologies InfiniiVision 7000 Series Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle Agilent Technologies InfiniiVision 7000 Series