Agilent Technologies InfiniiVision 7000 Series Manuel d'utilisateur télécharger pdf (Page 24)

Performance characteristics (continued)

General characteristics (continued)

Trigger out When Triggers is selected (delay ~17 ns)

0 to 5 V into high impedance

0 to 2.5 V into 50 Ω

When Source Frequency or Source Frequency/8 is selected

0 to 580 mV into high impedance

0 to 290 mV into 50 Ω

Max frequency output: 350 MHz (in source frequency mode when terminated in 50 Ω)

125 MHz (in source frequency/8 mode when terminated in 50 Ω)

10 MHz ref in/out TTL out, 180 mV to 1 V amplitude with 0 to 2 V offset

Kensington lock Connection on rear panel for security

Power requirements

Line voltage range 100-120V, 50/60/400 Hz; 100-240V, 50/60 Hz auto ranging

Line frequency 50/60 Hz, 100-240 VAC; 400 Hz, 100-120 VAC

Power usage 120 W max

Environmental characteristics

Ambient temperature Operating -10 °C to +55 °C; non-operating –40 °C to +70 °C

Humidity Operating 95% RH at 40 °C for 24 hr; non-operating 90% RH at 65 °C for 24 hr

Altitude Operating to 4,570 m (15,000 ft); non-operating to 15,244 m (50,000 ft)

Vibration Agilent class B1 and MIL-PRF-28800F; class 3 random

Shock Agilent class B1 and MIL-PRF-28800F; class 3 random; (operating 30g, 1/2 sine,

11 ms duration, 3 shocks/axis along major axis, total of 18 shocks)

Pollution degree Normally only dry non-conductive pollution occurs.

Occasionally a temporary conductivity caused by condensation must be expected.

Typical operator noise 30 dBa at front of instrument, 35 dBa at rear of instrument.

Indoor use Rated for indoor use only

Other

Measurement categories CAT I

Regulatory information Safety IEC 61010-1:2001 / EN 61010-1:2001

Canada: CSA C22.2 No. 1010.1:1992

UL 61010B-1:2003

Supplementary information The product herewith complies with the requirements of the Low Voltage Directive

73/23/EEC and the EMC Directive 89/336/EEC, and carries the CE-marking accordingly.

The product was tested in a typical configuration with HP/Agilent test systems.

1 2 ... 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Agilent Technologies InfiniiVision 7000 Series Manuel d'utilisateur Page 24