Agilent Technologies 83640A Manuel d'utilisateur télécharger pdf (Page 6)

Installation Note 83650-90007 5

Removing the Front Panel

5. Remove the vinyl trim strip from the top front edge of the instrument. (Place a flat screwdriver in

either slot in the trim strip and lift to remove; see Figure 1).

Figure 1. Front Panel Trim Strip

6. Refer to Figure 2. Remove three of the four screws under the trim strip.

7. Remove two of the five screws on the lower front frame edge.

Figure 2. Front Panel Screw Locations

8. Gently pry the front panel and display from the frame.

9. Cut the tie wraps holding the cables.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Pas de commentaire

Agilent Technologies 83640A Manuel d'utilisateur Page 6