Agilent Technologies U4154A Guide d'installation télécharger pdf (Page 22)

22 U4154A Logic Analyzer Installation Guide

2 Setting up the Hardware for U4154A

Remove the module: Open the module insertion/extraction

handles by pivoting them out towards you. This unseats

the module from the chassis backplane.

4 Use the module insertion/extraction handles to pull the

module out from the chassis.

Refer to the Agilent M9502A/M9505A AXIe Chassis User’s

Guide to get general guidelines and steps on how to install a

module in AXIe chassis. You can find this guide in a PDF

format on the CD that came with the chassis.

To install multiple U4154A modules in the AXIe chassis

You can install multiple U4154A modules in different slots of

the same AXIe chassis to make a multi- card set. This

multi- card set represents a single logical U4154A module in

the Agilent Logic Analyzer application and thereby provides

you an increased number of channels per module.

For setting up multiple U4154A modules in an AXIe chassis,

use a pair of U4154- 61601 flex cables (in the accessory

pouch) to connect the U4154A modules.

The following figures display both the sides of a flex cable

shipped with the U4154A module.

CAUTION

Do not remove the AXIe ESM, which is integral to the operation of

the chassis. AXIe ESM that needs servicing is to be removed by

Agilent personnel only.

NOTE

When multiple modules are installed and connected together in an AXIe chassis to

form a multi-card set, pods are indexed from the bottom module up.

You can connect two U4154A modules in an AXIe chassis to form a multi-card set.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 67 68

Pas de commentaire

Agilent Technologies U4154A Guide d'installation Page 22