Agilent Technologies U4154A Guide d'installation télécharger pdf (Page 23)

Setting up the Hardware for U4154A 2

U4154A Logic Analyzer Installation Guide 23

To install multiple U4154A modules in an AXIe chassis

1 Remove the bolt from its holding position on the top

cover of the U4154A module.

NOTE

Turn off the AXIe chassis and host PC power before removing, replacing, or

installing modules.

CAUTION

When removing modules that are connected together as multiple-card

modules, be sure to eject the multiple modules simultaneously, otherwise,

the flex cables and/or connectors could be damaged.

The enclosure surface of the U4154A module may become hot during use. If

you need to remove the module, first power down the AXIe chassis, allow

the module to cool, and then pull the module out of the chassis.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 67 68

Pas de commentaire

Agilent Technologies U4154A Guide d'installation Page 23