Agilent Technologies 1100 Series Guide de l'utilisateur télécharger pdf (Page 12)

6 Agilent 1100 Series Valves

1 Installation and Configuration

Hardware Installation

In order to install a valve on the G1383A Column Organizer the Organizer Rail

Assembly must be installed on the two mounting poles using the clips from the

Organizer Rail Assembly. All External Valves have a bracket on the side which

slides over the metal part of the Organizer Rail Assembly.

Two CAN connectors and one DC-CAN connector are located at the back panel

of the 1100 Series Valve Assemblies as displayed in Figure 2.

Setting up the CAN connection

Connect the CAN-Cable (PN 5181-1519) to one of the CAN ports at back panel

of the 1100 Series valve and to a free CAN-Port on another Agilent 1100 Series

module. The second CAN-Port can be used to add additional valves or modules

to the HPLC system.

Figure 2 Back Panel of the Agilent 1100 Series Valves

CAN-DC-Out

CAN port

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 77 78

Pas de commentaire

Agilent Technologies 1100 Series Guide de l'utilisateur Page 12