Agilent Technologies Option H48 Multiport Test Set Z5623A Manuel d'utilisateur télécharger pdf (Page 7)

Z5621A Family of test sets

Designed to work with the 8753 family of network analyzers

Frequency range: 1 MHz to 6 GHz Switch type: Solid State

Connectors: Analyzer: APC-7 Test port: Type-N (f) Switching speed: 60 ms

Impedance: 50 ohm I/O control: Parallel and test set interconnect

Option Designed for: Ports Raw (uncorrected) Raw (uncorrected) Test set type

(Works with:) return loss insertion loss

≥ 18 dB, 1 MHz to 1.3 GHz ≤ 3.5 dB, 1 MHz to 1.3 GHz

H36 3 ≥ 18 dB, 1.3 GHz to 3 GHz ≤ 3.5 dB, 1.3 GHz to 3 GHz Duplexer

8753D/E/ES ≥ 12.5 dB, 3 GHz to 6 GHz ≤ 5.5 dB, 3 GHz to 6 GHz

≥ 18 dB, 1 MHz to 1.3 GHz ≤ 7 dB, 1 MHz to 1.3 GHz

H39 3 ≥ 18 dB, 1.3 GHz to 3 GHz ≤ 7 dB, 1.3 GHz to 3 GHz Full crossbar

≥ 12.5 dB, 3 GHz to 6 GHz ≤ 9 dB, 3 GHz to 6 GHz

Z5623A Family of test sets

Designed to work with the PNA Series of network analyzers

The graphical multiport application interface is used to set up measurement paths, sequences, and calibration states. The multiport automation interface

based on the COM concept is provided allowing external test executive development in a variety of popular languages.

Frequency range:

1 MHz to 9 GHz

Connectors: Type-N (f)

Impedance: 50 ohm I/O control: GPIB and parallel

Option Designed for: Ports Switching Raw (uncorrected)

Raw (uncorrected) Test set type

(Works with:) type/speed return loss insertion loss

≥ 24 dB, 1.0 MHz to 1.3 GHz ≤ 5.0 dB, 1.0 MHz to 1.3 GHz

H03 3 Solid state/11ms

≥ 14 dB, 1.3 GHz to 3.0 GHz ≤ 6.0 dB, 1.3 GHz to 3.0 GHz

Duplexer

≥ 10 dB, 3.0 GHz to 6.0 GHz ≤ 7.0 dB, 3.0 GHz to 6.0 GHz

PNA ≥ 8.0 dB, 6.0 GHz to 9.0 GHz ≤ 9.0 dB, 6.0 GHz to 9.0 GHz

≥ 20 dB, 10 MHz to 1.3 GHz ≤ 7.0 dB, 10 MHz to 1.3 GHz

H46

(8753E/S)

6 Solid state/11ms

≥ 14 dB, 1.3 GHz to 3.0 GHz ≤ 8.0 dB, 1.3 GHz to 3.0 GHz

Triplexer

≥ 10 dB, 3.0 GHz to 6.0 GHz ≤ 9.5 dB, 3.0 GHz to 6.0 GHz

(871xD/ES)

≥ 7.0 dB, 6.0 GHz to 9.0 GHz ≤ 11.5 dB, 6.0 GHz to 9.0 GHz

≥ 26 dB, 1.0 MHz to 1.3 GHz ≤ 1.5 dB, 1.0 MHz to 1.3 GHz

H48

8 Mechanical/50ms

≥ 24 dB, 1.3 GHz to 3.0 GHz ≤ 2.0 dB, 1.3 GHz to 3.0 GHz

Full crossbar

≥ 16 dB, 3.0 GHz to 6.0 GHz ≤ 2.5 dB, 3.0 GHz to 6.0 GHz

≥ 14 dB, 6.0 GHz to 9.0 GHz ≤ 3.5 dB, 6.0 GHz to 9.0 GHz

N441x Family of balanced measurement test sets

The included Windows based software controls system, applies four-port error correction, and calculates and displays parameters.

Switch type: Solid state Impedance: 50 ohms

Model Designed for: Ports Frequency range Connectors Test set type

Number (Works with:) Test ports Analyzer interconnects

N4413A 8753ES opt 006,011 4 50 MHz to 6 GHz 3.5 mm (m) Type-N (f)

N4414A 8753ES opt 006,011 4 300 kHz to 6 GHz 3.5 mm (m) Type-N (f)

N4415A 8753ES opt 006,014 2

30 kHz to 6 GHz 7 mm Type-N (f) Full crossbar

N4416A E8357A opt 015 2

300 kHz to 6 GHz 7 mm SMA (f)

N4418A 8720ES opt H32, H42 2

50 MHz to 20 GHz 3.5 mm (m) SMA (f)

1 Test set has four external control lines to enable control of module switching during test

2 Additional adapters and RF cables are needed to connect the test set.

3 N441x family of test sets are controlled by an application running on an external PC

4 Test sets connect to network analyzer through front panel jumpers. System uses the two ports of the network analyzer and the two test set ports for four system test ports.

5 The Z5623A H46 frequency range is 10 MHz to 9 GHz.

6 Return loss of test set port not used in measurement path.

Duplexer/Triplexer = Tests normal transmission and receive paths only. Not all port to port path measurements are possible

Full crossbar = Measurements between all ports are possible.

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Agilent Technologies Option H48 Multiport Test Set Z5623A Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Agilent Technologies Option H48 Multiport Test Set Z5623A