Agilent Technologies 86100B Manuel de service télécharger pdf (Page 94)

4-36

Replacing Instrument Assemblies

A13 Acquisition Board PLD Header Modification (86100A Only)

A13 Acquisition Board PLD Header Modification

(86100A Only)

Refer to ”Preventative Maintenance” on page 1-17 in “General Information” for serial prefix

information.

1 Follow the instructions for removing the mainframe cover, on page 4-4.

2 Follow the instructions for removing the A13 Acquisition Board, on page 4-32.

3 Place the jumper, shown in Figure 4-56, on P12 so that the resistors are connected to pins 1, 4, and

5, shown in Figure 4-57. The jumper key should face towards the front panel.

Figure 4-56. Jumper, E2660-01201

Figure 4-57. Placement of the Jumper on P12

4 Reassemble the A13 Acquisition Board in reverse order of removal.

5 Reassemble the Mainframe Cover in reverse order of removal.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 165 166

Pas de commentaire

Agilent Technologies 86100B Manuel de service Page 94