Agilent-technologies Wireless Network Optimization Platform E6474A Manuel d'utilisateur Page 173

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 194
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 172
Specifications C
Agilent E6474A User’s Guide 173
Adjacent channel desensitization
Adjacent channel rejection
Internally generated spurious, input referred
– 25 dBm typical
45 dB typical
– 120 dBm
Input/Output RF input 50Ω Ty p e - N
Connectors Computer RS-232 (DB9) Male
GPS RS-232 (DB9) Male
Power DC power jack 100 mils, positive center
Miscellaneous Operating temperature range C to 55°C
Maximum relative humidity 80% for temperatures up to 31°C, decreasing
linearly to 50% relative humidity at 40°C
Storage temperature range 40°C to +70°C
Dimensions 6 in × 3-5/8 in × 8 in
15.24 cm x 9.21 cm x 20.32 cm
Weight 4.6 lbs (2.1 kg)
Power
Power (internal GPS, option 200)
9 to 34 V DC, 9W
9 to 34 V DC, 10W
Transformer AC Power (supplied with
receiver)
100 - 240 Volts AC 50 - 60 Hz
Internal GPS
**
(Option
200)
GPS Receiver 8 Channel internal GPS receiver
Connector type SMA
Differential compatible without dead reckoning
Note: Internal GPS is standard on all “C” receivers. It can be disabled if you wish to use an
external GPS system.
* It is recommended the input signal level not exceed – 40 dBm.
Adjacent channel desensitization: 1 dB compression of tuned signal with interfering signal 1.25 MHz from tuned signal.
Adjacent channel rejection applies to the narrowband mode (200 kHz IF filter) and is defined as: Suppression of interfering
signal ± 200 kHz from tuned signal for 200 kHz.
** Receivers (with the exception of “C” receivers) fitted with an internal GPS do not support connection to external GPS
receivers.
Item Description Specification
Vue de la page 172
1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 193 194

Commentaires sur ces manuels

Pas de commentaire