Agilent-technologies Wireless Network Optimization Platform E6474A Manuel d'utilisateur télécharger pdf (Page 44)

44 Agilent E6474A User’s Guide

3 Set Up Your System

Batteries

Checking the remaining charge

Press the test button shown in Figure 21 to check the

remaining charge capacity.

Figure 21 Battery test button

When using the booster module attached to the battery,

battery status can be seen from the LEDs on the top of the

booster module.

LEDs Lit Capacity Remaining

4 76% to 100%

3 55 to 75%

2 26% to 50%

1 10% to 25%

1 Blinking Less than 10%

PUSH

100

Li-ION

Battery

test

button

LEDs

NOTE

When there is no battery status indication from the LEDs then the battery

discharge may be critical. You should charge the battery as soon as

possible. Refer to the documentation provided with the battery and battery

charger units.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 193 194

Pas de commentaire

Agilent-technologies Wireless Network Optimization Platform E6474A Manuel d'utilisateur Page 44