Agilent Technologies E1346A Manuel de service télécharger pdf (Page 18)

Shipping

Guidelines

Follow the steps in Figure 1-3 to return a relay multiplexer to a Agilent

Technologies Sales and Support Office or Service Center.

1 Prepare the Multiplexer

• Remove user wiring from terminal block

• Attach tag to module/pod that identifies

- Owner

- Model Number/Serial Number

- Service Required

• Place tagged device in approved anti-static bag

2 Package the Multiplexer

• Place packaged multiplexer in shipping carton*

• Place 75 to 100 mm (3 to 4 inches) of shock-

absorbing material around the multiplexer.

• Seal the shipping carton securely.

• Mark the shipping carton FRAGILE.

3 Ship the Multiplexer to Agilent Technologies

• Place address label on shipping carton

• Send carton to Agilent Technologies

*We recommend that you use the same shipping materials as those used in factory packaging (available from

Agilent Technologies).

For other (commercially-available) shipping materials, use a double-wall carton with a minimum 2.4 MPa (350 psi) test.

Figure 1-3. Packaging/Shipping Guidelines

1-10 General Information

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 65 66

Pas de commentaire

Agilent Technologies E1346A Manuel de service Page 18