Agilent Technologies B2201A Guide de l'utilisateur télécharger pdf (Page 158)

5-30 Agilent B2200 User’s Guide, Edition 4

SCPI Command Reference

[:ROUTe]:BIAS:CHANnel:ENABle:CARD

Example OUTPUT @Agb2200;":ROUT:BIAS:CHAN:ENAB:CARD ALL"

OUTPUT @Agb2200;":ROUT:BIAS:CHAN:DIS (@10101)"

OUTPUT @Agb2200;":ROUT:BIAS:CHAN:DIS? (@10101,10102,10201)"

ENTER @Agb2200;A$

This example bias-disables the output port 1 on the card 1. In this example, A$ will

be 1,0,1.

[:ROUTe]:BIAS:CHANnel:ENABle:CARD

This command bias-enables the all output ports (channels) for the specified card.

When the Bias Mode is ON, the bias-enabled output ports that have not been

connected to any other input port are connected to the input Bias Port. This

command is available only for the specified card. At *RST, all cards are

bias-enabled. The bias mode is set by “[:ROUTe]:BIAS[:STATe]”.

Syntax [:ROUTe]:BIAS:CHANnel:ENABle:CARD card_number

Example OUTPUT @Agb2200;":ROUT:BIAS:CHAN:ENAB:CARD ALL"

[:ROUTe]:BIAS:CHANnel:ENABle[:LIST]

This command specifies the bias-enabled output ports (channels). When the Bias

Mode is ON, the bias-enabled output ports that have not been connected to any

other input port are connected to the input Bias Port. Then, the input Bias Port will

not be connected to the output ports that have been connected to any other input

port. At *RST, all channels are bias-enabled. The bias mode is set by

“[:ROUTe]:BIAS[:STATe]”.

The query returns whether the specified channels are bias-enabled or not.

Syntax [:ROUTe]:BIAS:CHANnel:ENABle[:LIST] (@channel_list)

[:ROUTe]:BIAS:CHANnel:ENABle[:LIST]? (@channel_list)

Parameter Explanation

card_number For Auto Config mode: 0 or ALL

For Normal Config mode: 1, 2, 3, 4, or ALL

Parameter Explanation

channel_list Channels to bias-enable or to check.

For channel_list, see “Switch Control” on page 4-5.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 229 230

Pas de commentaire

Agilent Technologies B2201A Guide de l'utilisateur Page 158