Agilent Technologies SMPTE 310M Manuel d'utilisateur télécharger pdf (Page 15)

MPEGscope Plus and MPEGscope Lite

If your MPEGscope has a Real-time Analyzer, disconnect

the ribbon cable from the Real-time Analyzer card. The

cable runs from the MPEGscope main card to the Real-

time Analyzer card.

If your optional line interface is connected to the

MPEGscope main card with a cable, disconnect the

cable from the optional interface card.

Remove the faceplate screw from slot 3

with the screwdriver provided, then

remove the optional line interface.

If your optional line interface is connected to the

MPEGscope main card with a cable, disconnect the other

end of the cable from the MPEGscope main card and

remove the cable.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Pas de commentaire

Agilent Technologies SMPTE 310M Manuel d'utilisateur Page 15