Agilent Technologies SMPTE 310M Manuel d'utilisateur télécharger pdf (Page 16)

MPEGscope Plus and MPEGscope Lite

Step 3: Install SMPTE interface

Attach the antistatic wrist strap to your wrist and to the PC chassis as described in the instructions on the

envelope. Ensure that the copper foil end of this strap attaches to an electrical ground.

IMPORTANT:

Install the SMPTE 310M interface card into slot 3 and screw the

faceplate to the PC chassis. (If this is the first interface installed

into slot 3, you will have to remove the blank faceplate first.)

If your MPEGscope has a Real-time Analyzer,

reconnect the ribbon cable from the MPEGscope main

card to the Real-time Analyzer card.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 33 34

Pas de commentaire

Agilent Technologies SMPTE 310M Manuel d'utilisateur Page 16