Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Guide d'installation télécharger pdf (Page 41)

Installing Logic Analyzer Cards and Probes 2

16900 Series Logic Analysis Systems Installation Guide 41

3 Now, slide the next card about 1/3 of the way into its slot, so that it is

aligned with the lower card.

4 Attach the flex cables to the top side of the lower card:

a Flip up the connector actuator with your thumb or index finder. Do

not use any type of tool to open the actuator.

b Place the flex cable into the connector, exposed conductive traces

towards the card, so that the flex cable ears are secured by the

connector guides.

Be careful not to bend the flex cables any more than is necessary to

fit between the card connectors.

c Close the connector actuator.

d Repeat for the opposite top-side flex cable and connector.

5 Repeat steps 2- 4 for the remaining cards.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 137 138

Pas de commentaire

Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Guide d'installation Page 41