Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Spécifications télécharger pdf (Page 178)

178

Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System

Analyzer Probing Overview

Adapter-to-Board Connection

Both the 01650-63203 and the E5346A adapters include termination

for the logic analyzer. The 01650-63203 termination adapter plugs into

a 2 x 10 pin header with 0.1 inch spacing. The E5346A high-density

adapter connects to an AMP "Mictor 38" connector. If possible, use

support shrouds around the Mictor connector to relieve strain and

improve connections.

Direct Pod-to-Board Connection

If you provide proper termination as part of the target board, you can

plug the pod directly into the ©3M 2520-series, or similar alternative

connector. Suggested termination is shown in the Logic Analysis

System and Measurement Modules Installation Guide.

Also use this termination with the Agilent Technologies E5351A high-

density, non-terminated adapter.

Pod-to-Analysis Probe Connection

Analysis probes (formerly called preprocessors) are microprocessor-

specific interfaces that make it easier to probe buses. Generally,

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 220 221

Pas de commentaire

Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Spécifications Page 178