Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Spécifications télécharger pdf (Page 93)

Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System

Using Both Analyzers

Configure the Timing Analyzer

The Sampling Tab

From the Sampling tab, set the analyzer to Timing Mode, and

configure the Timing Mode Controls as shown below.

The Format Tab

1. Rename the label to Address.

2. Assign the bits that map to the input probe signals.

The Trigger Tab

1. From the Trigger Functions tab, select Find edge AND pattern, then

select Replace.

2. From the Pattern tab, assign Pattern1 the desired pattern you want to

trigger on. In this example we use the pattern "55" Hex. By default, Edge1

is set to don't care which is OK for this example.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 220 221

Pas de commentaire

Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Spécifications Page 93