Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Spécifications télécharger pdf (Page 84)

Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System

Using a Timing Analyzer and an Oscilloscope

Configure the Oscilloscope

Depending on the kind of glitch you are triggering on, the type of

probes used, and the speed of your system, your configuration could

vary from the one shown. In this example, we are triggering on a

positive glitch that is present for less that 20 ns.

Channel Setup

1. From the Channels tab in the oscilloscope window, select Setup....

2. From the Channels Setup dialog, configure channel 1 as shown below. Turn

channel 2 off.

Trigger Setup

1. From the Channels tab in the oscilloscope window, select Trigger....

2. Set the Mode field to Pattern.

3. Configure the pattern as a high pulse on channel 1.

4. Qualify the pattern to be present for less than 20 ns.

5. Select Close.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 220 221

Pas de commentaire

Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Spécifications Page 84