Agilent Technologies 86100B Manuel d'utilisateur télécharger pdf (Page 11)

Module Specifications (continued)

High Bandwidth, Single Mode Optical/

Electrical Modules 86106B 86109A

OPTICAL CHANNEL SPECIFICATIONS

Optical Channel Unfiltered Bandwidth 28 GHz 30 GHz

Wavelength Range 1000–1600 nm

Calibrated Wavelengths 1310 nm and 1550 nm

Filtered Data Rates (Mb/s) 9953 No internal filters

Sensitivity (smallest average power for mask test) –7 dBm N/A

Transition Time (10% to 90%,

calculated from TR = 0.48/BW optical) 18 ps 16 ps

RMS Noise

Characteristic 10 µW (Filtered) 15 µW (Unfiltered)

18 µW (Unfiltered)

Maximum 15 µW (Filtered) 30 µW (Unfiltered)

30 µW (Unfiltered)

Scale Factor

Minimum 20 µW/division

Maximum 500 µW/division

dc Accuracy (single marker, referenced to ±50 µW ±4% of (reading-channel offset)

average power monitor)

dc Difference (two markers, referenced to average power ±4% of delta

monitor, 50 µW/division)

dc Offset (referenced two divisions from screen bottom) +1 mW to –3 mW

Average Power Monitor (specified operating range) –27 dBm to +3 dBm (2 µW to 2 mW)

Factory Calibrated Accuracy ±5% ±100 nW ±connector uncertainty, 20°C to 30°C

User Calibrated Accuracy ±2% ±100 nW ±power meter uncertainty, <5°C change

Maximum Input Power

Specified 2 mW (+3 dBm)

Maximum Peak 10 mW (+10 dBm)

Fiber Input 9/125 µm, user selectable

Input Return Loss (HMS-10 connector fully filled fiber) 30 dB

Specified with 8 point moving average in frequency response

ELECTRICAL CHANNEL SPECIFICATIONS

Electrical Channel Bandwidth 18 and 40 GHz

Transition Time (10% to 90%, 19.5 ps, 18 GHz; 9 ps, 40 GHz

calculated from TR = 0.35/BW)

RMS Noise

Typical 0.25 mV, 18 GHz; 0.5 mV, 40 GHz

Maximum 0.5m V, 18 GHz; 1.0 mV, 40 GHz

Scale Factor

Minimum 1 mV/division

Maximum 100 mV/division

dc Accuracy (single marker, referenced to average ±0.4% of full scale ±2 mV ±1.5% of (reading-channel offset), 18 GHz

power monitor) ±0.4% of full scale ±2 mV ±3% of (reading-channel offset), 40 GHz

dc Difference (two markers, referenced to average ±0.8% of full scale ±1.5% of delta, 18 GHz

power monitor, 50 µW/division) ±0.8% of full scale ±3% of delta, 40 GHz

dc Offset (referenced two divisions from screen bottom) ±500 mV

Input Dynamic Range (relative to channel offset) ±400 mV

Maximum Input Power 16 dBm ±2 Vdc

Nominal Impedance 50 ohm

Reflections (for 20 ps rise time) 5%

Electrical Input 2.4 mm

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Agilent Technologies 86100B Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle Agilent Technologies 86100B