7
Specifications
Mainframe Specifications
HORIZONTAL SYSTEM (Time Base)
Scale Factor Full scale is ten divisions.
Minimum 2 ps/div
Maximum 1 s/div
Delay Time offset relative to the front panel trigger input on the instrument mainframe.
Minimum ≥24 ns (Standard), 28 ns (Option 001)
Maximum 1000 screen diameters or 10 s, whichever is smaller
Time Interval Accuracy ≤8 ps + 0.1% of reading (dual marker measurement performed at a temperature within ±5°C
of horizontal calibration temperature) 8 ps + 0.1% + 0.5 ps/°C to (5 < absolute temperature
value <15°C)
Time Interval Resolution ≤ (screen diameter)/(record length) or 62.5 fs, whichever is larger
Display Units Bits or time
VERTICAL SYSTEM (Channels)
Number of Channels 4 (simultaneous acquisition)
Vertical Resolution 12 bit A/D converter (up to 15 bits with averaging)
Full Resolution Channel Scales Adjusts in a 1-2-5-10 sequence for coarse adjustment or fine adjustment resolution from the
front panel knob
Adjustments Scale, offset, activate filter
Specifications describe warranted performance over the temperature range of +10°C to + 40°C (unless otherwise noted). The specifications are
applicable for the temperature after the instrument is turned on for one (1) hour. This period of continuous operation must occur while self-calibration is
valid. Many performance parameters are enhanced through frequent, simple user calibrations. Characteristics provide useful, non-warranted
information about the functions and performance of the instrument. Characteristics are printed in italic typeface.
Factory Calibration Cycle -For optimum performance, the instrument should have a complete verification of specifications once every twelve (12) months.
General Specifications
This instrument meets Agilent Technologies’ environmental specifications (section 750) for class B-1 products with exception as described for
temperature and condensation. Contact your local field engineer for complete details.
Temperature
Operating 10°C to +40°C (50°F to + 104°F)
Non-operating –40°C to +70°C (–40°F to +158°F)
Humidity
Operating Up to 90% humidity (non-condensing) at +40°C (+104°F)
Non-operating Up to 95% relative humidity at +65°C (+149°F)
Altitude
Operating Up to 4,600 meters (15,000 ft)
Non-operating Up to 15,300 meters (50,000 ft)
Vibration
Operating Random vibration 5–500 Hz, 10 minutes per axis, 2.41 g (rms)
Non-operating Random vibration 5–500 Hz, 10 minutes per axis, 0.3 g (rms); Resonant search, 5–500 Hz
swept sine, 1 octave/min sweep rate, 0.75 g, 5 minute resonant dwell at 4 resonances/raxis
Power Requirements
Voltage 90–132 or 198–264 Vac, 48–66 Hz
Power (including modules) 545 VA; 375 W
Weight
Without modules 12.7 kg (28 lb)
Each Module 1.2 kg (2.6 lb)
Dimensions (excluding handle)
Without front connectors and rear feet 215.1 mm H x 425.5 mm W x 521 mm D (8.47 in x 16.75 in x 20.5 in)
With front connectors and rear feet 215.1 mm H x 425.5 mm W x 584 mm D (8.47 in x 16.75 in x 23.0 in)
Commentaires sur ces manuels