Agilent Technologies 86100B Manuel d'utilisateur télécharger pdf (Page 6)

has two selectable bandwidth

settings. The 12.4 GHz bandwidth

mode provides the best oscillo-

scope noise performance. The 20

GHz mode allows greater fidelity

for high-speed signals. The cali-

brated, integrated optical channel

has over 2.85 GHz bandwidth for

easy, precise single mode and

multimode optical measurements.

The 86101A and 86103A utilize

switchable reference filters for

transceiver compliance testing at

OC-3, OC-12, OC-48, Fibre Channel

1063 Mb/s, and Gigabit Ethernet

1250 Mb/s data rates. The 86101A

operates over the 750 nm to 860

nm wavelength range, and the

86103A operates over the 1000 nm

to 1600 nm wavelength range.

The Agilent 86105A module has

two measurement channels, one

optical and one electrical. The elec-

trical channel has two selectable

bandwidth settings. The 12.4 GHz

bandwidth mode provides the best

oscilloscope noise performance.

The 20 GHz mode allows greater

fidelity for high-speed signals. The

calibrated, integrated optical

channel has 20 GHz bandwidth for

single mode optical measurements.

The 86105A utilizes switchable

reference filters for transceiver

compliance testing at OC-3, OC-12,

OC-48 or OC-192 data rates.

The Agilent 86106B module has a

28 GHz optical channel and 40 GHz

electrical channel. Both channels

have a reduced bandwidth setting

of 20 GHz for improved noise

performance. The calibrated, inte-

grated optical channel has a

switchable reference filter for

transceiver compliance testing at

OC-192 (9.953 Gb/s).

The Agilent 86109A module has a

30 GHz optical measurement

channel and a 40 GHz electrical

channel. The electrical channel also

has a reduced bandwidth setting of

18 GHz for improved noise perfor-

mance. The optical channel

frequency response is designed to

minimize distortion of the

displayed optical pulse and does

not include any provision for

switching a SDH/SONET filter into

the channel.

The Agilent 86112A electrical

module provides two electrical

measurement channels with user

selectable bandwidths. The 12.4

GHz bandwidth mode provides

excellent oscilloscope noise perfor-

mance for accurate measurement

of small signals. The 20 GHz band-

width mode provides high fidelity

display and measurement of very

high-speed waveforms.

The Agilent 83484A electrical

module provides two electrical

measurement channels with user

selectable bandwidths. The 26.5

GHz bandwidth mode provides

excellent oscilloscope noise perfor-

mance for accurate measurement

of small signals. The 50 GHz band-

width mode provides high fidelity

display and measurement of very

high-speed waveforms.

The Agilent 83494A single-mode

clock recovery plug-in module is an

integrated solution for high-speed

digital transmission test. When a

separate trigger source is not avail-

able, the 83494A can derive a

timing reference directly from the

signal under test. The 83494A can

synchronize to all SONET/SDH

transmission rates through 10 Gb/s

with exceptional jitter performance

that ensures an accurate display of

the test waveform.

The Agilent 8349xA series of clock

recovery modules provide a recov-

ered clock trigger and recovered

data output, and the ability to

trigger on data for slower non-

standard rates. The 83491A accepts

electrical inputs, the 83492A

accepts multimode fiber inputs, and

the 83493A accepts single mode

fiber inputs. All three clock

recovery modules support standard

telecom and enterprise data rates.

The Agilent 54753A single-ended

TDR module has TDR step gener-

ator built into channel one. The

bandwidth of the TDR/vertical

channel is 18 GHz. The bandwidth

of channel two is 20 GHz.

The Agilent 54754A differential

TDR module has two independent

vertical channels and two step

generators. The bandwidth of both

channels is 18 GHz. The step gener-

ators may be operated singly,

simultaneously but independently,

differentially, or as common-mode

stimulus. The TDR results may be

viewed as common mode or differ-

entially and displayed simultane-

ously. Once selected, the display

mode is computed automatically,

freeing the user from setting up

mathematical functions. Included

with each of these TDR modules is

a TDR demo board, programmers

guide, 2 50Ω terminations, APC-3.5

(m), and one short, APC-3.5 (m).

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Agilent Technologies 86100B Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle Agilent Technologies 86100B