Agilent Technologies Sprinkler 54753a Manuel d'utilisateur télécharger pdf (Page 41)

Command

:TDR{2 | 4}:RESPonse{1 | 2 | 3 | 4}:RISetime[?]

Sets the risetime for the normalized response. The risetime setting is limited

by the timebase settings and the record length.

Risetime setting in seconds.

Command

:TDR{2 | 4}:RESPonse{1 | 2 | 3 | 4}:TDRDest[?]

CHANnel<number>

Selects a TDR destination channel for an external stimulus. When you use an

external stimulus, you must use this command to specify where the TDR

channel is coming into the instrument.

An integer, 1 through 4, indicating the slot in which the channel resides,

followed by an optional A or B identifying which of two possible channels in

the slot is being referenced.

Command

:TDR{2 | 4}:RESPonse{1 | 2 | 3 | 4}:TDRTDT[?]

{TDR | TDT}

Sets the instrument to make either TDR or TDT measurements. When the

setting is TDT, both TDR and TDT measurements can be made

simultaneously. You must select a TDT destination channel before selecting

TDT.

Command

:TDR{2 | 4}:RESPonse{1 | 2 | 3 | 4}:TDTDest[?]

{NONE | CHANnel<number>}

Selects a destination channel for a normalization measurement.

An integer, 1 through 4, indicating the slot in which the channel resides,

followed by an optional A or B identifying which of two possible channels in

the slot is being referenced.

TDR Commands

1 2 ... 36 37 38 39 40 41 42 43 44

Pas de commentaire

Agilent Technologies Sprinkler 54753a Manuel d'utilisateur Page 41