Agilent Technologies J3916A Manuel d'utilisateur télécharger pdf (Page 39)

Local Terminal Configuration

Using the Main Menu

To configure the probe, connect a terminal directly to the probe and use the probe

Main Menu.

NOTE

The probe is not available to the network when you are using the configuration

menus.

To view the probe Main Menu:

1. Connect a terminal or a personal computer (PC) emulating a terminal to the

probe RS-232 connector using a null modem cable. Refer to Appendix A,

“Cables and Connectors” on page 113 for more information on cables.

2. Configure the terminal for 8 bits/character, 1 stop bit, no parity, Xon/Xoff

handshaking, and a baud rate of 9600.

3. Connect the power cord to the probe and to a power source (either 100-120/

VAC or 220-240/VAC). The probe does not have a power switch, but is

turned on by connecting to a power source.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 178 179

Pas de commentaire

Agilent Technologies J3916A Manuel d'utilisateur Page 39