Agilent Technologies E1345A Manuel d'utilisateur télécharger pdf (Page 69)

70 Relay Multiplexer Command Reference

Scanning Using Bus Triggers

TRIG:SOUR BUS

Select interface (BUS) triggering.

SCAN (@100:115)

Sets channel list.

INIT

Starts scanning cycle.

*TRG

Advances scan using BUS triggering.

:SOURce?

TRIGger:SOURce? returns the current trigger source for the switchbox. Command

returns either

BUS, EXT, HOLD, or IMM for trigger sources BUS, EXTernal, HOLD,

IMMediate, respectively.

Example Query Trigger Source

TRIG:SOUR EXT

Sets trigger source to external.

TRIG:SOUR?

Query trigger source; returns EXT.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 92 93

*E1345-90005* 1
Contents 3
2 Contents 4
Contents 3 5
4 Contents 6
Safety Symbols 8
WARNINGS 8
Documentation History 8
Declaration of Conformity 9
Getting Started 10
Getting Started 13Chapter 1 12
• specify the card number 13
• specify the channel number 13
Getting Started 15Chapter 1 14
SCPI Command 15
Format Used in This 15
Initial Operation 16
Chapter 2 18
Warnings and Cautions 18
Connecting Field Wiring 19
Wiring a Terminal Module 20
Connecting the Analog Bus 21
Setting the Card ID 22
Using the Scanning 23
Voltmeter 23
Configuration 23
Connecting User Inputs 28
Chapter 3 30
Using This Chapter 30
Multiplexer Commands 30
Example: Connect 31
Channels 02 and 09 to 31
Making Measurements 33
Channels 02 and 10 to 34
Tree Terminals for 4-Wire 34
Ohms Measurements 34
Example: Making Voltage 35
Measurements by 35
Scanning 35
(E1344A/47A Modules Only) 38
Chapter 4 40
Figure 4-1. Scanning Commands 41
Example: Scanning With 43
External Devices 43
Example: Scanning 44
"Event In" Ports 44
Using the Scan Complete Bit 45
Chapter 5 46
Command Types 46
SCPI Command Reference 48
Subsystem Syntax ABORt 49
• *RST Condition: ARM:COUNt 1 50
1 and MAX returns 32767 51
Parameters 51
Comments 51
:MONitor:CARD 52
:MONitor[:STATe] 53
INITiate 54
:CONTinuous? 55
[:IMMediate] 55
[ROUTe:] 57
SCAN:MODE? 61
SCAN:PORT 61
:OPERation:ENABle 62
:OPERation[:EVENt]? 63
:CDEScription? 64
:SOURce? 69
IEEE 488.2 Common Commands 70
Command Quick Reference 71
16-Channel Relay Multiplexer 72
Specifications 72
Relay Life 74
End of Life Detection 74
Replacement Strategy 74
Appendix B 76
Computer 77
Configurations 77
= 1FC000 79
08, is register number 4 79
Reading the 80
Registers 80
Writing to the 81
Error Messages 84
Symbols: 86
C (continued) 87
Index 89 88
90 Index 89
R (continued) 90
S (continued) 91
Index 93 92
94 Index 93

Commentaires sur ces manuels

Pas de commentaire

Agilent Technologies E1345A Manuel d'utilisateur Page 69

Commentaires sur ces manuels