Agilent Technologies Agilent B2201A Manuel d'utilisateur télécharger pdf (Page 66)

3-6 Agilent B2200 User’s Guide, Edition 2

Front Panel Operation

Operation

To Open All Switches

1. Press the Open All key.

2. Press the arrow key to display YES, then press the

Enter key.

NOTE Status after this operation

When the bias mode is ON, the bias-enabled output ports will be connected to the

input bias port.

When the ground mode is ON, the ground-enabled input/output ports will be

connected to the input ground port.

To Save/Load Setup Data

The Agilent B2200 provides the internal memory used to save the setup condition.

Eight setup conditions can be saved into the memory.

To save the setup

1. Press the Shift key and the Load Memory key.

2. Press the arrow key to select the internal memory (01 to 08).

3. Press the

Enter key to save the setup. Or press the Exit key to cancel this

operation.

Wait until the save operation is completed. Then, the LCD displays the status

and setup conditions.

To load the setup

1. Press the Load Memory key.

2. Press the arrow key to select the internal memory (01 to 08).

3. Press the

Enter key to load the setup. Or press the Exit key to cancel this

operation. Wait until the load operation is completed. Then, the LCD displays

the status and setup conditions.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 233 234

Pas de commentaire

Agilent Technologies Agilent B2201A Manuel d'utilisateur Page 66