Agilent Technologies Switch E2050-90003 Manuel d'utilisateur télécharger pdf (Page 28)

28 Chapter 2

Installation

Installing the Hardware

Step 3: Connect the Gateway to the Network

n Ethertwist Connection. For Ethertwist, connect the LAN cable to the

RJ-45 connector on the back panel of the Gateway.

CAUTION

Do not connect to both the RJ-45 and the BNC connectors on the

Gateway. Only one connection to the LAN interface in the Gateway can

be made at a time. Data loss may occur if you try to use both connectors

simultaneously. The Gateway will automatically select the active port.

NOTE

To connect the Gateway to a ThickLAN or fiber optic network, see the

hardware documentation for with your ThickLAN or fiber optic network to

connect the LAN cable to the RJ-45 connector on the Gateway.

To connect the Gateway directly to a client computer system, you will

need a special twisted-pair cable. Contact Agilent Technologies for more

information.

Connecting to an Ethertwist LAN Using an RJ-45 Connector

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 109 110

Pas de commentaire

Agilent Technologies Switch E2050-90003 Manuel d'utilisateur Page 28