Agilent Technologies HP 54601B Guide de l'utilisateur télécharger pdf (Page 48)

To create a branching sequence

Each sequence step can be branched to different steps depending on the

result of the mask testing.

1 Press Print/Utility twice.

2 Press the Sequence Admin softkey.

3 Press the Define Sequence softkey.

4 Press the Step softkey, or turn the knob closest to the Cursors key,

to select the step number to be modified.

5 Press the Define Step softkey.

6 Press the Branching softkey.

A softkey menu with five softkey choices appears. Four of them are used to

define branching.

•

Pass, Fail Min, Fail Max Selects the branching destination for

different test results: pass, fail minimum limit, or fail maximum limit. The

destination step is selected by turning the knob closest to the Cursors key.

Possible selections are step number, Next, or Same.

•

Default Branching Sets the branching destination for all test results

to Next.

•

Previous Menu Returns you to the previous softkey menu.

7 Press the branching destination softkey corresponding to the test

result.

8 Turn the knob closest to the Cursors key to change the branching

destination.

Operating the Test Automation Module

To create a branching sequence

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 122 123

Pas de commentaire

Agilent Technologies HP 54601B Guide de l'utilisateur Page 48