Agilent Technologies 8000 Series Manuel de l'opérateur Page 64
- Page / 126
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
64 8000 Operator’s Manual
4 Operating the 8000
6 Purge Volume (syringe
pump)
If your system configuration includes the syringe pump, use this option to set a purge
volume that ensures all stranded medium is properly expelled.
Select option 6, Purge Volume. Enter a value for the purge volume that ensures at
least two strokes of the syringe plunger and press ENTER. The Program Variables
screen displays.
Note: The first stroke moves all medium from the sampling lines to the return lines.
The second stroke draws air into the sampling lines and purges the remaining
medium from the return lines. As with priming, the longer the tubing lengths, the
larger the purge volume required.
7 R-M (peristaltic pump) If your system configuration includes the peristaltic pump, select option 7, R-M. The
Replacement Media Option screen displays. Select option 1, Enable. Enter the
desired percentage of replacement medium and press ENTER. Optionally, select
option 2, Disable. The Program Variables screen displays.
Note: If the RM option is not installed, select option 2, Disable.
7 Filter Chg (syringe pump
and filter changer)
If your system configuration includes the syringe pump and filter changer, select
option 7, Filter Chg. Enter the desired number of samples each filter should process
before being discharged and press ENTER. The recommended value is 1. The
Program Variables screen displays.
Note: If your system configuration includes the syringe pump and filter changer,
ensure the syringe pump option is enabled. From the Ready screen, press MENU.
Select option 3, Set Syringe Pump. Select option 1, Enable. Also press MENU > 0 >
P and select option 1, Enable.
The replacement media option is not available with this system configuration. Ensure
the RM option for the syringe pump is disabled using the hidden key function MENU
> 0 > R.
7 R-M (syringe
pump)
If your system configuration includes the syringe pump but not the filter changer,
select option 7, R-M. The Replacement Media Option screen displays. Select option
1, Enable, or option 2, Disable. If the RM option is not installed, select option 2,
Disable. The Program Variables screen displays.
Note: If your system configuration includes the syringe pump, ensure the syringe
pump option is enabled. From the Ready screen, press MENU. Select option 3, Set
Syringe Pump. Select option
1, Enable. Also press MENU > 0 > P and select option
1, Enable.
If your system configuration includes the syringe pump but not the filter changer, use
the hidden key function MENU > 0 > R to enable or disable the RM option, as
appropriate. If the RM option is not installed, select option 2, Disable.
Table 1 0 Program Variables Options (Apparatus 1 / 2)
Option Function
- Agilent 8000 1
- Dissolution Sampling 1
- Contents 3
- 4 8000 Operator’s Manual 4
- 8000 Operator’s Manual 5 5
- 6 8000 Operator’s Manual 6
- 8000 Operator’s Manual 7 7
- 8 8000 Operator’s Manual 8
- 8000 Operator’s Manual 9 9
- 10 8000 Operator’s Manual 10
- Electrical Hazards 12
- Information Symbols 14
- Introduction 15
- 8000 with Peristaltic Pump 17
- CC1234xxxx 18
- Setting Up the 8000 19
- Unpacking Your 8000 21
- Installation 22
- Setup of 8000 and Components 34
- Installing the Sample Tray 36
- (Peristaltic Pump only) 37
- Installing the RM Module 38
- External Unit 39
- Hidden Key Functions 41
- 42 8000 Operator’s Manual 42
- 3 Setting Up the 8000 42
- Table 1 Hidden Key Functions 42
- Setting Up the 8000 3 43
- 8000 Operator’s Manual 43 43
- 44 8000 Operator’s Manual 44
- Operating the 8000 45
- 8000 Keypad Options 46
- Operating the 8000 4 47
- 8000 Operator’s Manual 47 47
- Main Menu 48
- 8000 Operator’s Manual 49 49
- 50 8000 Operator’s Manual 50
- 52 8000 Operator’s Manual 52
- 54 8000 Operator’s Manual 54
- 56 8000 Operator’s Manual 56
- 60 8000 Operator’s Manual 60
- Creating a Sample Program 61
- 8000 Operator’s Manual 63 63
- 64 8000 Operator’s Manual 64
- SAMPLE TIME POINT: 000:02 65
- Starting a 8000 Program 66
- 68 8000 Operator’s Manual 68
- DISSO Options Screen 69
- 70 8000 Operator’s Manual 70
- 8000 Operator’s Manual 71 71
- 8000 Operator’s Manual 73 73
- 8000 Operator’s Manual 75 75
- 76 8000 Operator’s Manual 76
- 78 8000 Operator’s Manual 78
- 82 8000 Operator’s Manual 82
- ON R-M PUMP displays 84
- 8000 Operator’s Manual 85 85
- 88 8000 Operator’s Manual 88
- 8000 Operator’s Manual 89 89
- Starting a Program 91
- APP 3/7 Options Screen 93
- 94 8000 Operator’s Manual 94
- Table 2 4 App 3/7 Options 94
- Manual Sample 95
- 96 8000 Operator’s Manual 96
- Automatic Calibration 97
- 1 MANUAL 2 AUTOMATIC 98
- Manual Calibration 99
- Daisy Chaining 102
- 104 8000 Operator’s Manual 104
- 4 Operating the 8000 104
- Agilent Technologies 105
- Preventive Maintenance 106
- Apparatus 3 / 7 107
- Start Immediately 108
- Programmed Clean 108
- Apparatus 1 / 2 111
- Syringe and Seal Replacement 112
- Cleaning the Syringes 113
- Filter Changer (optional) 115
- Report Center Impact Printer 119
- Replacing a Paper Roll 120
- Toggling Your Printer Online 121
- Printer Self Test 121
- Printer Configuration 122
- 124 8000 Operator’s Manual 124
- 8000 Operator’s Manual 125 125
- 126 8000 Operator’s Manual 126
Produits connexes et manuels pour Imprimer et scanner Agilent Technologies 8000 Series
(82 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.077 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels