Agilent Technologies B2902 Manuel de service télécharger pdf (Page 201)

Agilent B2900 SCPI Command Reference, Edition 2 4- 79

Subsystem Commands

:SENSe:<CURRent[:DC]|VOLTage[:DC]>:RANGe:AUTO:MODE

:SENSe:<CURRent[:DC]|VOLTage[:DC]>:RANGe:AU

TO:MODE

Selects the operation mode of the automatic measurement ranging. This command

setting is not effective if the automatic ranging is disabled by the

:SENSe:<CURRent[:DC]|RESistance|VOLTage[:DC]>:RANGe:AUTO command.

Syntax :SENSe[c]:<CURRent[:DC]|VOLTage[:DC]>:RANGe:AUTO:MODE mode

:SENSe[c]:<CURRent[:DC]|VOLTage[:DC]>:RANGe:AUTO:MODE?

For <CURRent[:DC]|VOLTage[:DC]>, specify CURRent[:DC] for current

measurement, or VOLTage[:DC] for voltage measurement.

Parameter mode NORMal (default)|RESolution|SPEed. Parameter data type is

CPD.

mode=NORMal supports basic operation and downward changing operation

described below

mode=RESolution supports basic operation and upward changing operation

described below

mode=SPEed supports basic operation and upward and downward changing

operations described below

• Basic operation

The channel automatically sets the range which provides the best resolution to

perform the measurement.

• Upward changing operation

If measured data  value1, the range shifts upward after a measurement.

value1 = measurement range  rate / 100

• Downward changing operation

If measured data  value2, the range shifts downward immediately.

value2 = measurement range  rate / 1000

rate value is set by the

:SENSe:<CURRent[:DC]|VOLTage[:DC]>:RANGe:AUTO:THReshold command.

Query response mode <newline>

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 325 326

Pas de commentaire

Agilent Technologies B2902 Manuel de service Page 201