Agilent Technologies B2902 Manuel de service télécharger pdf (Page 228)

4- 106 Agilent B2900 SCPI Command Reference, Edition 2

Subsystem Commands

[:SOURce]:LIST:<CURRent|VOLTage>:STARt

For <CURRent|VOLTage>, specify CURRent for current output, or VOLTage for

voltage output.

Query response number_of_data <newline>

number_of_data returns the number of data in the list. Response data type is NR1.

Example :LIST:VOLT:POIN?

:SOUR2:LIST:CURR:POIN?

[:SOURce]:LIST:<CURRent|VOLTage>:STARt

Specifies the list sweep start point by using the index of the list.

Syntax [:SOURce[c]]:LIST:<CURRent|VOLTage>:STARt start

[:SOURce[c]]:LIST:<CURRent|VOLTage>:STARt?

For <CURRent|VOLTage>, specify CURRent for current output, or VOLTage for

voltage output.

Parameter start Index of the list. 1 to 2500. Default is 1. Parameter data type is

NR1. start=1 indicates the first data in the list (top of the list).

start=0 or the value greater than 2500 causes an error.

Query response start <newline>

start returns the present setting of the list sweep start point. Response data type is

NR1.

Example :LIST:VOLT:STAR 10

:SOUR2:LIST:CURR:STAR?

[:SOURce]:PULSe:DELay

Sets the pulse delay time for the specified channel. The pulse delay time is the time

from starting the pulse base output to starting the pulse level transition (or to starting

the pulse peak output).

Syntax [:SOURce[c]]:PULSe:DELay delay

[:SOURce[c]]:PULSe:DELay? [delay]

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 325 326

Pas de commentaire

Agilent Technologies B2902 Manuel de service Page 228