Agilent Technologies B2902 Manuel de service télécharger pdf (Page 259)

Agilent B2900 SCPI Command Reference, Edition 2 4- 137

Subsystem Commands

:SYSTem:FAN:MODE

response returns code,message which contains the error/event code and message.

Multiple responses are listed in the FIFO (first-in-first-out) order, separated by a

comma. Data type of code is NR1 and message is SRD.

If the queue is empty, the response is +0,“No error”.

Example :SYST:ERR?

:SYSTem:FAN:MODE

Sets the fan control mode. This command setting is not changed by power off or the

*RST command.

Syntax :SYSTem:FAN:MODE mode

:SYSTem:FAN:MODE?

Parameter mode Fan control mode, NORMal|RACK. Parameter data type is

CPD.

mode=NORM is for normal use.

mode=RACK is for using in rack

Query response mode <newline>

mode returns the present setting, NORM or RACK. Response data type is CRD.

Example :SYST:FAN:MODE RACK

:SYST:FAN:MODE?

:SYSTem:GROup[:DEFine]

Defines the channel group. This command setting is not changed by power off or the

*RST command.

The channel grouping is used to control the channel output timing automatically so

that the channel keeps the output while the other channel performs measurement.

The grouped channels start the source output in the order of the channel number,

then start the measurement at the same time, and keep the output until the

measurement is completed.

If the grouping is released, the channels work independently regardless of the

condition of the other channel.

1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 325 326

Pas de commentaire

Agilent Technologies B2902 Manuel de service Page 259