Agilent Technologies 2000 X-Series Manuel de service télécharger pdf (Page 411)

100

101

411

Agilent InfiniiVision 2000 X-Series Oscilloscopes

Programmer's Guide

:POD Commands

Control all oscilloscope functions associated with groups of digital

channels. See "Introduction to :POD<n> Commands" on page 411.

Introduction to

:POD<n>

Commands

<n> ::= 1

The POD subsystem commands control the viewing and threshold of

groups of digital channels.

POD1 ::= D0- D7

Reporting the Setup

Use :POD1? to query setup information for the POD subsystem.

Return Format

The following is a sample response from the :POD1? query. In this case,

the query was issued following a *RST command.

:POD1:DISP 0;THR 1.40E+00

Table 72 :POD<n> Commands Summary

Command Query Options and Query Returns

:POD<n>:DISPlay {{0 |

OFF} | {1 | ON}} (see

page 412)

:POD<n>:DISPlay? (see

page 412)

{0 | 1}

<n> ::= 1 in NR1 format

:POD<n>:SIZE <value>

(see page 413)

:POD<n>:SIZE? (see

page 413)

<value> ::= {SMALl | MEDium |

LARGe}

:POD<n>:THReshold

<type>[suffix] (see

page 414)

:POD<n>:THReshold?

(see page 414)

<n> ::= 1 in NR1 format

<type> ::= {CMOS | ECL | TTL |

<user defined value>}

<user defined value> ::= value in

NR3 format

[suffix] ::= {V | mV | uV }

NOTE

These commands are only valid for the MSO models.

1 2 ... 406 407 408 409 410 411 412 413 414 415 416 ... 929 930

Commentaires sur ces manuels

Pas de commentaire

Agilent Technologies 2000 X-Series Manuel de service Page 411

Commentaires sur ces manuels

Produits connexes et manuels pour Multimètres Agilent Technologies 2000 X-Series