Agilent Technologies 2000 X-Series Manuel de service télécharger pdf (Page 473)

:SBUS<n> Commands 25

Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 473

:SBUS<n>:IIC:TRIGger:PATTern:ADDRess

(see page 790)

Command Syntax

:SBUS<n>:IIC:TRIGger:PATTern:ADDRess <value>

<value> ::= integer or <string>

<string> ::= "0xnn" where n ::= {0,..,9 | A,..,F}

The :SBUS<n>:IIC:TRIGger:PATTern:ADDRess command sets the address for

IIC data.The address can range from 0x00 to 0x7F (7- bit) or 0x3FF

(10- bit) hexadecimal. Use the don't care address (- 1 or 0xFFFFFFFF) to

ignore the address value.

Query Syntax

:SBUS<n>:IIC:TRIGger:PATTern:ADDRess?

The :SBUS<n>:IIC:TRIGger:PATTern:ADDRess? query returns the current

address for IIC data.

Return Format

<value> ::= integer

See Also • "Introduction to :TRIGger Commands" on page 589

• ":SBUS<n>:IIC:TRIGger:PATTern:DATA" on page 474

• ":SBUS<n>:IIC:TRIGger:PATTern:DATa2" on page 475

• ":SBUS<n>:IIC:TRIGger[:TYPE]" on page 477

Pas de commentaire

Agilent Technologies 2000 X-Series Manuel de service Page 473